Recirculating Chillers
Machine tool coolers for self-contained recirculating chillers.
In-Line Coolers
Pump fluids through the in-line cooler.
OC Models for Water or Water-Based Coolants including de-ionized water, water/glycol mixtures, and water-based synthetic coolants. Evaporators are brazed stainless steel plates rated for 350 PSI working pressure. Piping and fittings are non-ferrous. A Low Flow switch automatically shuts down refrigeration on loss of coolant flow. Coolant passing through cooler must be clean, otherwise specify optional In-Line Filter (ILF) or Cleanable Evaporator (CEV).
OCO Models for Oil or Oil-Based Coolants. Evaporators are brazed, enhanced stainless steel plates rated for 350 PSI working pressure. Piping and fittings are copper, bronze, steel or hose. A Low Flow switch automatically shuts down refrigeration on loss of oil flow.
Applications
- Coolant Systems
- Filtration Systems
- Hydraulic Systems
- EDM
- Cold Spray
- Batch Cooling
- Film Developing
- Ingredient Water
- Food Processing
Closed-Loop Coolers
Self-contained recirculating chillers.
OC Models for Water or Water-Based Coolants including de-ionized water, water/glycol mixtures, and water-based synthetic coolants. OC models are supplied with a durable stainless steel coolant tank with filler/breather port and coolant level gauge. Evaporators are stainless steel immersion coils (up to 3 HP) or stainless steel brazed plates. Piping and fittings are non-ferrous. Standard pumps are bronze, brass, or stainless steel.
OCO Models for Oil or Oil-Based Coolants. OCO models are supplied with a rugged steel tank with filler/breather port and oil level gauge. Evaporators are enhanced stainless steel, brazed plates. Piping and fittings are copper, bronze, steel, or hose. Cast iron gear pumps are standard.
Applications
- High-Speed Spindles
- Lasers
- Power Supplies
- Diffusion Pumps
- Jacketed Vessels
- Chill Rolls
- Injection Molding
- Linear Motors
- Medical Equipment
- Welding
- Vacuum Systems
- Heat Exchangers