Machine Tool Coolant Coolers
Machine Tool Coolers for Coolant Sumps, Coolant Filtration Systems, Cutting Oils, Grinding Fluids, High Pressure Coolant, Water Jet Cutting
Drop-In Coolers
Space saving design to cool fluids in a tank.
OC Models for Water or Water-Based Coolants including de-ionized water, water/glycol mixtures, and water-based synthetic coolants. Ideal for dirty coolants. Evaporators are seamless, stainless steel, immersion coils. Coil dimensions can be modified to fit tank. Agitation pumps are provided as standard on larger models (1 HP and above).
OCO Models for Light Oil or Oil-Based Coolants. Not suitable for all oils or installations (check with Turmoil). Minimum set-point temperature: 80ºF (27ºC). Evaporators are seamless, stainless steel, immersion coils. Coil dimensions can be modified to fit tank. Agitation pumps are standard on all models.
Applications
- Coolant Tanks
- Filtration Tanks
- Settling Tanks
- EDM
- Quench Tanks
- Fish Tanks
In-Line Coolers
Pump fluids through the in-line cooler.
OC Models for Water or Water-Based Coolants including de-ionized water, water/glycol mixtures, and water-based synthetic coolants. Evaporators are brazed stainless steel plates rated for 350 PSI working pressure. Piping and fittings are non-ferrous. A Low Flow switch automatically shuts down refrigeration on loss of coolant flow. Coolant passing through cooler must be clean, otherwise specify optional In-Line Filter (ILF) or Cleanable Evaporator (CEV).
OCO Models for Oil or Oil-Based Coolants. Evaporators are brazed, enhanced stainless steel plates rated for 350 PSI working pressure. Piping and fittings are copper, bronze, steel or hose. A Low Flow switch automatically shuts down refrigeration on loss of oil flow.
Applications
- Coolant Systems
- Filtration Systems
- Hydraulic Systems
- EDM
- Cold Spray
- Batch Cooling
- Film Developing
- Ingredient Water
- Food Processing
Open-Loop Coolers
Recirculate fluid from a remote tank.
OC Models for Water or Water-Based Coolants including de-ionized water, water/glycol mixtures, and water-based synthetic coolants. Evaporators are brazed, stainless steel plates. Piping and fittings are non-ferrous. Self-priming, bronze, centrifugal pumps are standard. Coolant recirculating through the cooler must be clean, otherwise specify optional In-Line Filter (-ILF) or Cleanable Evaporator (-CEV).
OCO Models for Oil or Oil-Based Coolants. Evaporators are brazed, enhanced stainless steel plates. Piping and fittings are copper, bronze, steel, or hose. Self-priming, cast-iron gear pumps are standard. Oil recirculating through the cooler must be clean, otherwise specify optional In-Line Filter (-ILF) or Cleanable Heat Exchanger (-CHX).
Applications
- Coolant Sumps
- Filtration Tanks
- Hydraulic Tanks
- EDM
- Process Tanks
- Quench Tanks
- Headstocks
- Gear Boxes
- Fish Tanks